H07Z1-K HALOGEN-FREE SINGLE LAYER CABLE

H07Z1-K HALOGEN-FREE SINGLE LAYER CABLE


  • Product Code: H07Z1-K(AS)

Toxfree ES05Z1-K & H07Z1-K is a LSZH safety cable. In the event of fire, it does not emit toxic gases, nor does it give off corrosive gases, avoiding any possible damage to people or electronic equipment. For these reasons it is highly recommended for use in public places such as: hospitals, schools, museums, airports, bus terminals, shopping malls, offices, laboratories, etc.


Conductor

Electrolytic copper, class 5 (flexible), based on EN 60228 and IEC 60228.

Insulation

Extra sliding low smoke zero halogen (LSZH) polyolefin insulation.

The standard identification of insulated conductors is the following:

Blue RAL 5015

Brown RAL 8003

Black RAL 9005

Red RAL 3000

Green/yellow RAL 1021 / RAL 6018

Grey RAL 7000

Dark Blue RAL 5003

White RAL 9010

Orange RAL 2003

Violet RAL 4005

Other colours available on request

Standards UNE-EN 50525-3-31 / UNE 211002 / UL 1581
Meter by meter marking from 10 mm2 onwards
Water resistance Water resistance: AD3 Sprays.
Applications -Domestic use. -Electrical panel wiring. -Public places.
Thermal Performance Maximum service temperature: 90ºC (UL 1581) / 70ºC (EN 50525-3-31). Maximum short-circuit temperature: 160ºC (max. 5 s). Minimum service temperature: -40ºC (fixed and protected installations).
Electrical Performance LOW VOLTAGE 300/500 V · 450/750 V · UL 600 V
Fire Performance Flame non-propagation based on UNE-EN 60332-1 and IEC 60332-1. -Fire non-propagation based on UNE-EN 60332-3 and -IEC 60332-3. -LSZH (Low Smoke Zero Halogen) based on UNE-EN -60754-1 and IEC 60754-1. -Low smoke emission based on UNE-EN 61034 and IEC -61034: Light transmittance > 60% -Low corrosive gases emission based on UNE-EN -60754-2 and IEC 60754-2
Mechanical Performamnce Minimum bending radius: x5 cable diameter
Installation Condition In conduit.
Chemical performance Chemical & Oil resistance: Acceptable